3D-Druck

Links

3D-Drucker kalibrieren und einstellen

Cura

Filamente

PLA

Temperatur: 180-220°C Bett Temperatur: 30-50°C Kühlung: 100% Print speed: 40-60mm/s PLA trocken halten

PETG

https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften...

Extraction between 30 and 60mm/s

Retraction settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control.

The optimal retraction speed for PETG is relatively low, around 35-40mm/s, for both Bowden and Direct Drive extruders. The optimal retraction distance is between 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders

Fan-Speed niedrig für gute Layerhaftung, höher für Sauberkeit.

TPU

3D-Druck TPU drucken