3D-Druck: Unterschied zwischen den Versionen
Aus Wikizone
(→PLA) |
(→PETG) |
||
| Zeile 13: | Zeile 13: | ||
=== PETG === | === PETG === | ||
https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften... | https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften... | ||
| − | |||
| − | + | Print speed 30 - 60mm/s | |
| − | + | Retraction 35-40mm/s Bowden and Direct Drive extruders | |
| − | + | settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control. | |
| − | + | Retraction distance 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders | |
| − | + | Fan-Speed niedrig für gute Layerhaftung, höher für Sauberkeit. | |
=== TPU === | === TPU === | ||
[[3D-Druck TPU drucken]] | [[3D-Druck TPU drucken]] | ||
Version vom 10. Juli 2022, 21:30 Uhr
Links
3D-Drucker kalibrieren und einstellen
Cura
Filamente
PLA
Temperatur: 180-220°C Bett Temperatur: 30-50°C Kühlung: 100% Print speed: 40-60mm/s PLA trocken halten
PETG
https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften...
Print speed 30 - 60mm/s Retraction 35-40mm/s Bowden and Direct Drive extruders
settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control.
Retraction distance 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders Fan-Speed niedrig für gute Layerhaftung, höher für Sauberkeit.
TPU
3D-Druck TPU drucken
