3D-Druck: Unterschied zwischen den Versionen
Aus Wikizone
(→PETG) |
(→PLA) |
||
| Zeile 5: | Zeile 5: | ||
== Filamente == | == Filamente == | ||
=== PLA === | === PLA === | ||
| − | + | Temperatur: 180-220°C | |
| + | Bett Temperatur: 30-50°C | ||
| + | Kühlung: 100% | ||
| + | Print speed: 40-60mm/s | ||
| + | PLA trocken halten | ||
=== PETG === | === PETG === | ||
Version vom 10. Juli 2022, 13:42 Uhr
Links
3D-Drucker kalibrieren und einstellen
Cura
Filamente
PLA
Temperatur: 180-220°C Bett Temperatur: 30-50°C Kühlung: 100% Print speed: 40-60mm/s PLA trocken halten
PETG
https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften...
Extraction between 30 and 60mm/s
Retraction settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control.
The optimal retraction speed for PETG is relatively low, around 35-40mm/s, for both Bowden and Direct Drive extruders. The optimal retraction distance is between 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders
Fan-Speed niedrig für gute Layerhaftung, höher für Sauberkeit.
TPU
3D-Druck TPU drucken
