3D-Druck: Unterschied zwischen den Versionen
Aus Wikizone
(→PLA) |
(→PETG) |
||
| Zeile 9: | Zeile 9: | ||
=== PETG === | === PETG === | ||
https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften... | https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften... | ||
| + | '''Extraction''' between 30 and 60mm/s | ||
| + | |||
| + | '''Retraction''' settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control. | ||
| + | |||
| + | The optimal retraction speed for PETG is relatively low, around 35-40mm/s, for both Bowden and Direct Drive extruders. The optimal retraction distance is between 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders | ||
| + | |||
| + | '''Fan-Speed''' niedrig für gute Layerhaftung, höher für Sauberkeit. | ||
| + | |||
=== TPU === | === TPU === | ||
[[3D-Druck TPU drucken]] | [[3D-Druck TPU drucken]] | ||
Version vom 10. Juli 2022, 12:39 Uhr
Links
3D-Drucker kalibrieren und einstellen
Cura
Filamente
PLA
Todo
PETG
https://3dprinterly.com/filament-printing-guide/petg/ guter Guide, Einstellungen, Gesundheit, Eigenschaften...
Extraction between 30 and 60mm/s
Retraction settings for PETG are very different from those for other filaments. This is because PETG prints at a relatively high temperature so, the material flow is very hard to stop and control.
The optimal retraction speed for PETG is relatively low, around 35-40mm/s, for both Bowden and Direct Drive extruders. The optimal retraction distance is between 5-7mm for Bowden extruders and 2-4mm for direct-drive extruders
Fan-Speed niedrig für gute Layerhaftung, höher für Sauberkeit.
TPU
3D-Druck TPU drucken
